Posts Tagged ‘Oldwick’

Clinton Plumbing Repair Question: Why Is My Garbage Disposal “humming”?

Wednesday, February 22nd, 2012

Ah, the garbage disposal: one of the great conveniences of the modern kitchen in your Clinton home. When it is working well, it makes cleaning up after dinner so easy. But when it is on the fritz, there is nothing more annoying.

One common occurrence is the “humming” garbage disposal. You flip the switch to turn the disposal on, but instead of spinning up and sucking those coffee grounds away, it just makes a humming noise and doesn’t do anything. Definitely frustrating. The good news is that since it is making that humming noise, you may be in OK shape. Read on for an explanation.

There are two basic causes of the humming phenomenon. Let’s discuss the simpler one first.

 Stuck Flywheel

Most of the time, the problem is as simple as a stuck flywheel. Usually this problem is identified by the brevity of the humming sound, as the garbage disposal will either reset itself or the circuit breaker will trip and the whole thing will shut down.

To fix a stuck flywheel, follow these steps:

  1. Shut down the power to the garbage disposal by shutting of the circuit breaker or pulling the fuse.
  2. Using an offset wrench (it came with the disposal unit, but you can buy a replacement at the hardware store), turn the flywheel clockwise to dislodge it.

If the problem is just a stuck flywheel, that should take care of it. Remember to call a professional plumber if you do not have a lot of experience fixing plumbing problems on your own. But there is another, more complicated explanation for the humming sound.

 Seized Motor Bearing

If your efforts to free the flywheel did not get the disposal working again, then you may have a seized motor bearing on your hands. A disposal with a seized motor bearing needs to be replaced. It’s as simple as that.

However, before you go ahead and assume the worst, it would not hurt to have a professional look at it. It is possible that the flywheel is just quite stuck and needs the touch of a pro. If not, he can go ahead and install a new unit for you. If you are having problems with your garbage disposal, be sure to give Resolve Rooter a call!

History of Plumbing: Some Information From Clinton

Monday, October 3rd, 2011

We all know that water runs downhill in Clinton. That’s because of gravity. And that simple theory was the key milestone in the history of plumbing. As far back as the days of the Roman Empire, people were using gravity to move water from its source to where it was used. There were no systems of piping back then and no way to pressurize a means of transporting water from one location to another.

The beauty of the gravity movement was how the Roman engineers achieved it – through the use of aqueducts. These aqueducts carried water from higher elevations in mountains to the cities below. Some of them were outdoor architectural marvels but most of the water was carried through underground tunnels. The gravity that carried the water was achieved by a slight pitch in the tunnel or aqueduct. It is estimated that as much as 300 million gallons of water found its way into Rome every day.

The fall of the Roman Empire brought the demise of this elaborate system but other plumbing marvels followed in the decades and centuries to come.

The means of transporting water changed from aqueducts and tunnels to something that was very abundant in the early stages of developing countries like the United States – namely wood. Hollowed out logs were the forefathers of modern iron pipes. These wooden pipe systems were found in the northeastern U.S. in the 1800s. Unfortunately, wood exposed to water soon deteriorated and rotted – and also left a bad taste to the water.

Iron and steel water pipes began to show up in the late 1800s in the U.S. These pipes were characterized by their heavy weight. The next generation of piping was made from copper. This material was introduced in the early 1900s and became commonly used by the middle of the century. Eventually, plastic was used to replace copper and steel. It is less expensive and just as durable.

Of course, any type of indoor plumbing was deemed a luxury for the “common” homeowner in the 1800’s and 1900’s. Indoor plumbing was not a standard and as late as the 1940s and 50s, many homes still utilized the good old fashioned outhouses as toilet facilities. That happened, in part, because towns did not have central water pumping and treatment facilities – and there were no city sewer lines to tap into. And the cost of indoor plumbing was out of some household budgets.

Today, what we take for granted in our array of indoor fixtures and appliances would have been deemed a luxury fitting to kings and queens by our ancestors. It’s no wonder we coined the phrase, “I have to go sit on the throne.”